Updated on August 18, 2022
How To Install Bmx Bike Pegs
The time has come for you to go shred the gnar on your brand-new BMX. Here’s how to install pegs.
Related Article: best training wheels bike
First, you must decide which side of the pegs to put them on. There are a few guidelines to follow, but you’re free to disregard them.
When riding with your right foot forward, you’ll naturally turn to the left (counter-clockwise), thus you’ll want to set your pegs on the right to facilitate ramp stalls. Putting them on the left if you have your left foot ahead and turn to the right (clockwise)
Put your pegs on the right side if you prefer to turn right with your right foot in front of you. Put your pegs on the left if you’re turning to the left with your left foot forward. Goofy feet are the result of doing this. There’s no need to be concerned about having goofy feet, because Ryan Nyquist is the epitome of weird feet. To make a trick easier, you may sometimes see people switching their feet.
Getting ready to go
As a result, we now know which side of your bike to install pegs on. We’ll need a ratchet, an extension pole, and a 17 and 19mm deep socket to get the job done. You can even purchase a tool for installing and removing pegs from a BMX business, such as an Animal Kotulak or Eclat E-tool. Since most entry-level bikes now come with 19mm nuts, your problem may be that these tools only come with a 17mm socket.
Put your bike on a work stand so that you may remove your nuts. Remember that everything has been reversed for BMXers, so flip your bike over and keep in mind the new orientation. To begin, remove the front nut and bolt. To avoid stripping threads, apply a little layer of lubricant to the threads of your nut/bolt after you remove it. A manual transmission should not result in your front wheel bouncing down the road.
To begin, either set your peg on the axle or insert your nut into your socket. You’ll find it easier to locate and tighten the nut on the axle if you put it in your socket. Put the bolts in the socket and the peg on top if you have them. After guiding it into the hub, it will be easy to tighten it up.
A similar procedure is followed in reverse, but be careful not to over-tighten your chain or move your back wheel while loosening both nuts/bolts.
Related Article: best xc mountain bike
On which side do the pegs of a BMX bike go? (Assistive Hints)
BMX / By Mikey Barnard.
It is possible to accomplish more tricks on BMX bikes thanks to the use of BMX bike pegs. When it comes to BMX bikes, some riders mount their pegs on the right and others on the left side. As a result of my research, I am able to provide you with an answer that will improve your BMX riding skills as well.
The preference of the BMX rider often determines which side of the bike the pegs go on; the rider’s ability to maintain control and comfort while performing acrobatics is an important consideration. BMX bike pegs are often mounted on the same side of the bike as the rider’s leading foot. When coasting, place the pegs on the side where the rider’s right foot is most forward.
Is there a guide to BMX riding? Nope. The more time you spend on your BMX bike, the more diverse your trick repertoire becomes and the more fun you have. Equipping your BMX bike with pegs expands your trick repertoire while also improving your bike’s handling, agility, and balance. BMX stunt pegs will be covered in great detail in this post.
The contents of the book are listed in the table of contents.
Is there a certain side of BMX bike pegs that beginners should avoid?
Stunts on a BMX bike require a high degree of control and comfort on the bike, both on the ground and in the air, in order to succeed.
It’s impossible to stress the importance of these tiny pegs in BMX biking. It’s more important than you might think to position these pegs on your BMX bike in a way that provides the best control and comfort for your acrobatics.
Your feet moving to and from the pegs should be second nature to you; you shouldn’t have to look at them. You’ll be able to manoeuvre your BMX bike into different positions for stunts and tricks with increased agility and better control.
Inexperienced BMX riders will also tell you to put four pegs on your BMX bike if you’re just starting out or if you’re wanting to improve your stunts.
Aside from getting used to pegs, this will help you discover which side of the bike you prefer them on.
A lot of people find that they are able to perform feats on both sides of the bike just as effectively and choose to leave all four pegs on for a wider variety of trick combinations. Once you know which side you prefer, you can simply remove the pegs you don’t need from the other side.
Many Flatland BMX riders like to ride on all four pegs in order to do more feats. Four pegs allow these dance-like BMX riders to perform more creative feats, such as balancing on the front wheel with both feet on the front pegs or jumping off the pedals and landing on the rear pegs.
They prefer pegs on only one side of their Dirt bikes for street-style BMX riders, however. If they prefer to ride with their pegs on the same side as their bike’s drivetrain because it gives them more confidence, there are numerous hub guards, bash guards, and cassette guards available.
How Do You Determine Which Side of a BMX Bike Peg to Put It?
When it comes to deciding which side of the BMX bike pegs to use, there are two main schools of thinking, and as we’ve already established, neither is correct.
Pegs for BMX bikes should be mounted the other way around, according to the proponents of this theory. This is a precautionary measure to avoid destroying expensive and vital components. Exactly what I was going for.
The second school of thinking focuses on the strength and control of your dominant leg. A 180- or 360-degree bunny hop or manual action will cause your BMX bike to be swung to the right, depending on which leg is dominant and hence most typically facing front when you’re coasting on your bike. For grinding and railing, your BMX bike’s pegs should be on the outside of that arc.
When it comes to fitting pegs on your BMX bike, you should ride and grind as often as possible so that your stunts become more confident.
Does the same BMX Bike Peg fit all models?
All BMX bikes can use BMX pegs. Pegs are permitted on some BMX bikes, but not all. It is against the rules for BMX bike racers to use pegs on their bikes because of the danger they would provide in a crash due to the tight curves and shoulder-to-to-shoulder nature of the competition.
For safety reasons, dirt jumpers don’t ride their BMX bikes with pegs either, as the riders face far higher speeds and higher jumps than those who ride street/park and Flatlands BMX.
It is important to know the many kinds of bike pegs available.
BMX bike pegs, like BMX bike seats and grips, come in a wide variety of patterns, colors, and styles. There is a large selection of BMX bike pegs available in Chromoly steel or aluminum alloy, in a variety of shapes and sizes, to meet the needs of any rider.
BMX bike pegs have three fundamentals that must be taken into account: Axle and tyre dimensions, as well as overall height and width.
The usual length of BMX bike pegs is 100 mm long. Micro Pegs, which are only 30 mm long, are a popular alternative to the 110 mm of Extra Long Pegs.
In today’s BMX bikes, the axle size is typically 14 millimeters. BMX bikes used to use 10 mm axles, but the bigger 14 mm axles are now standard on all models because of the increased strength and rigidity they provide.
Size: While expert BMX riders may prefer “Skinny” pegs with a diameter of 35 mm or less because of their reduced weight, the normal BMX bike peg diameter is 38.5 mm.
Related Article: best truck bike racks
BMX Bike Pegs: How Do You Install Them?
BMX bikes’ front and rear axles may be quickly and easily retrofitted with these cylinders by simply adding a couple of bolts. As a general rule, most BMX bikes use 17-mm axle bolt nuts, whereas entry-level bikes have 19-mm axle bolts. All you’ll need is a 17 mm or 19 mm socket wrench or ratchet and extension pole.
Make sure to remove the axle’s nut and bolt. Locate and tighten the pegs on the axle and the nuts on the inside of the socket by putting them there. The bolts should likewise be inserted into the socket, with the peg above them, in the same way. A simple threading and tightening procedure is now possible. To save a headache while playing with your BMX bike’s chain tension and rear wheel placement, don’t loosen both the rear nut and bolts at the same time.
Due to the constant grinding of steel against concrete and other metal surfaces, BMX bike pegs are frequently replaced. Rotate the pegs, remove the nuts and bolts, and then tighten them again if one region has worn.
Hey, all I am Joe Marino I love to ride bikes and teach others how to ride them. Most of my articles are about which bike is best for others. I am passionate about cycling and it shows, whether I am writing about a $25 bicycle from any random website or a $5000 Santa Cruz.
I have always been the guy who gets calls from friends while at work asking which bike they should buy. I have written about the best city bike for commuting, the best folding bike for use on public transit, and even what to keep in mind when shopping for kids’ bikes.
You can follow my blog and read all of my other articles on my website.